A commonly used option for fixed restorations is a metal or zirconia framework with ceramic or acrylic veneering. The amount of alveolar bone resorption determines whether teeth or teeth and soft tissue must be replaced...
In the edentulous upper jaw the placement of implants can be challenging due to limited bone quantity and the presence of the maxillary sinus. Pterygoid implants have high success rates, similar bone loss levels to those of ...
Cement-retained restorations are a traditional design to attach a restoration (crown, bridge) to an implant-retained abutment, similar to cementing a crown or bridge restoration on a natural tooth. With the traditional, relatively...
Frameworks are veneered with veneering materials, to design the esthetics and shape of the definitive restoration. Framework material options for acrylic veneering include titanium, (CrCo) Cobalt - Chrome and precious alloys...
Frameworks can be made from titanium, zirconia, precious alloys and Co-Cr base alloys and can be cement-retained or screw-retained. With minimal bone resorption, a ceramo-metal restoration is preferable to accommodate interarch...
Implant-based prostheses can be cement-retained, screw-retained or a combination of both (Fig 1). By definition, an abutment is a component that is intermediate between the implant and the restoration and it is usually screw...
Implant supported overdentures are an evidence-based treatment option for edentulous patients leading to a significantly increased quality of life.
There are various retention elements available which connect the implants directly...
Implant overdentures are an excellent treatment option for edentulous patients and lead to significant improvement of quality of life. There are various options for their retention mechanism...
In the edentulous upper jaw the placement of implants can be challenging due to limited bone quantity and the presence of the maxillary sinus. Pterygoid implants present an alternative option to use residual bone for implant anchorage and to overcome the need for...
Zygomatic implants have been documented as a an alternative for the rehabilitation of the atrophic posterior maxilla with both the classical two stage and immediate loading protocols. Zygomatic implants avoid grafting and sinus lift procedures and therefore contribut
Less than 4-6 mm of vertical residual bone height in the posterior segment of the maxilla is an indication for a sinus augmentation procedure [Esposito]. The external access to the maxillary sinus is carried out at a lateral buccal alveolar...
Hand-made templates are duplicates obtained from the denture/tooth arrangement with access holes or titanium tubes. These are located in the correct positions and axes of the planned prosthetic teeth according to the CBCT a...
Advantages of abutment-supported prostheses are 1) When implants are not parallel to each other, the use of angulated abutments can "correct" for the non-parallelism 2) Angulated abutments are available for a screw-retained prosthesis and 3) Custom abutments can be...
The majority of commercially available implants are variations of Brånemark’s original design of a screw which he coined as 'fixtures'. This has been the starting point for numerous current market variations that incorporate convergent themes of implant material...
Accurate implant planning is the first step to achieve an optimum prosthetic result. Well-fitting, well-designed dentures can directly be used for planning and pre-surgical analysis or a new tooth arrangement and mock-up have to be considered...